The AUBO-i5 is a high-precision mini arm robot designed to function as a versatile collaborative robotics cobot, engineered to optimize electronics assembly lines through advanced kinematics and intuitive drag-to-teach programming. By bridging the gap between human dexterity and automated consistency, this unit facilitates rapid deployment in space-constrained industrial environments where human-machine collaboration is mandatory for efficiency.
Model: AUBO-i5
Payload Capacity: 5 kg
Reach Radius: 924 mm
Repeatability: ±0.02 mm
Degrees of Freedom: 6-Axis
Joint Range: ±360° (All joints)
Programming Interface: Graphical User Interface / Hand-guided Teaching
Communication Protocols: TCP/IP, Modbus TCP, PROFINET
Weight: 24 kg
Power Consumption: Rated at 200W-400W typical operating load
IP Rating: IP54
The AUBO-i5 operates on a foundation of proprietary control algorithms that ensure smooth trajectory planning and vibration suppression, critical for delicate electronics handling. Its integration cycle is significantly shorter than traditional industrial robots, as the system does not require extensive safety fencing due to its built-in force-torque monitoring sensors. This capability allows the unit to perform precise tasks such as PCB pick-and-place, screw driving, and light component soldering with a high degree of repeatability, effectively reducing scrap rates and maximizing throughput in cleanroom or semi-cleanroom assembly settings.
In modern automotive electronics manufacturing, the AUBO-i5 serves as a core component for inspection and assembly workstations. By offloading repetitive manual tasks, the robot enables operators to focus on complex quality control, resulting in a measurable increase in cycle-time efficiency. In consumer electronics assembly, the compact footprint allows the unit to fit into existing linear layouts, providing energy-efficient performance that maintains precise control during high-speed, high-density component placement. Its ability to maintain structural integrity under continuous duty cycles ensures long-term operational stability.
When considering the broader AUBO collaborative portfolio, users may also evaluate the AUBO-i3 or the AUBO-i10 for applications requiring different reach and payload specifications. While the AUBO-i5 is ideal for mid-range electronics assembly, the AUBO-i3 is better suited for ultra-compact tabletop tasks, whereas the AUBO-i10 offers extended reach for palletizing or heavy-duty logistics. For successful integration, engineers should verify the electrical topology of the target cell, as the AUBO-i5 is best suited for environments with controlled EMI and stable grounding, rather than high-arc welding or high-dust foundry zones.
Q: How can procurement departments verify that the AUBO-i5 units received are factory-sealed and authentic?
A: Verification should be conducted by cross-referencing the unique serial numbers on the controller and robot arm against the manufacturer's global database. Authorized distributors provide a Certificate of Origin and a factory-sealed verification document with every shipment. To check real-time stock allocation or request an official quote, contact Beijing Zhongping Technology Co., Ltd. directly.
Q: Does the acquisition process support blanket orders to mitigate supply chain volatility?
A: Yes, our sourcing experts facilitate blanket purchase agreements to lock in inventory and protect projects from market-driven lead-time fluctuations. This mechanism ensures that scheduled releases are fulfilled from verified, high-quality production lots.
Q: What are the protocols for handling international currency fluctuations during long-term procurement of collaborative robotics?
A: Authorized regional distributors typically utilize hedging mechanisms or pegged pricing strategies for large-scale projects to stabilize costs. Detailed terms regarding currency exposure are outlined during the initial contract phase by our commercial support team.
Q: If a specific hardware revision of the AUBO-i5 is discontinued, how is the transition handled?
A: When a product enters the End-of-Life (EOL) phase, our technical support department provides a compatibility migration report. This document details necessary firmware updates or minor mechanical adjustments required to ensure a seamless drop-in replacement with newer series models.
Q: Can we obtain traceable compliance documentation, such as CoC and RoHS, for industrial audits?
A: All procurement through professional supply channels includes a comprehensive document package, including the Certificate of Conformity (CoC), material compliance certificates, and full traceability logs required for rigorous factory audits.
Q: How does the firmware versioning affect the integration of the AUBO-i5 into existing legacy production lines?
A: Integration requires matching the firmware version of the cobot with the existing site-wide automation software. Our technical support department provides version-control consulting to ensure that new units do not introduce communication latency or protocol mismatches.
Q: How should a site engineer calculate the derating factor for this robot in a high-temperature industrial environment?
A: The AUBO-i5 is rated for standard operating temperatures; however, in environments exceeding 40°C, the duty cycle may need to be adjusted to prevent motor overheating. Technical teams require the specific ambient temperature profile of your facility to calculate the appropriate derating curve and ensure the longevity of the joint actuators.
Q: Are there specific shielding requirements for the control cable when integrating the AUBO-i5 near high-frequency induction equipment?
A: To maintain signal integrity, it is recommended to use double-shielded twisted pair cabling and ensure proper grounding to the main cabinet. For complex EMI environments, our technical support department can provide a site-specific cabling topology report upon request.
Q: Does the AUBO-i5 support seamless integration with third-party grippers and end-effectors via standardized I/O?
A: The system provides robust I/O interfaces compatible with a wide range of industry-standard pneumatic and electric grippers. Compatibility verification between specific gripper brands and the AUBO controller should be submitted to our technical team to confirm electrical and communication protocol alignment.
Q: What level of remote technical support is available for debugging complex assembly sequences?
A: Our technical support department offers remote diagnostic assistance, including log file analysis and virtual troubleshooting sessions. For advanced configuration or custom script development, our sourcing experts can coordinate onsite service visits or deep-dive technical workshops.
FAQ
1.Who are We?
Beijing Zhongping Technology Co., LTD., is a global industrial electrical automation service provider, is a scientific research, design, marketing, technical services, industrial Internet, international import and export services as one of the science and technology companies.
2.What can you buy from us?
PLC, inverter, human-machine interface, hydraulic products, low-voltage power distribution, industrial robots and core components
3.Is the item in stock or need to be purchased from another supplier?
We have a large inventory of goods and have our own warehouse.
4.What advantages do we have over other suppliers?
Our company has a large amount of inventory and a number of warehouses, but also in the country's important industrial provinces and cities with offices and a number of overseas service points. To provide you with intelligent manufacturing one-stop comprehensive services, save efforts, labor and cost.
5.Can you provide 100% new original authentic products?
We only sell new original genuine, no renovation, no fake, only for the original factory original!
6.How long is the delivery time?
If there is a stock, it will take 2-3 working days to ship, if the quantity is large, it will take 5-7 working days after receiving the payment, if it is not a conventional model, it will take some time, we will inform you of the specific delivery time.
7.Is there technical support available?
Of course, we have a professional technical team that can help you solve technical problems.
8.How do we guarantee quality?
We have three processes to control the quality of goods.
1) Our engineers will inspect the production and quality control in the factory regularly.
2) Incoming materials shall be inspected by experienced purchasing engineers before they can be stored.
3) At least 2 people in the logistics department cross-check the goods to be sent before delivery.
9.Can you guarantee the safe and reliable delivery of your products?
Yes, we strictly adopt the international standard packing. We also use special packaging for dangerous goods, and refrigerated shipping for items with temperature requirements. Special item packaging and general cargo standard packaging requirements may incur additional costs.
10.How about the freight?
The cost depends on how you choose to get the goods. Express is usually the fastest but also the most expensive way. Sea freight is the best solution for large quantities of goods. The exact shipping cost depends on the purchase amount、quantity and weight of your order. Please feel free to contact us for more information.
+86 010-64225983
+8613811814778
Building 26, Liyuan Community, Chaoyang District, Beijing, China
