The AUBO-iS7 is a high-precision small 6 axis robot designed for demanding industrial environments, serving as a versatile collaborative robot arm that integrates advanced force sensing and intuitive drag-to-teach capabilities to optimize automated assembly lines. By utilizing a sophisticated control architecture, this system addresses the industry-wide requirement for flexible, human-robot collaborative (HRC) manufacturing solutions while maintaining consistent repeatability and structural rigidity.
The AUBO-iS7 is engineered to bridge the gap between high-speed automated production and the need for adaptable, safe deployment in shared workspaces. Unlike traditional industrial robots that require rigid safety fencing, the iS7 leverages advanced torque sensors in each joint to provide collision detection and power-and-force limiting (PFL) performance, ensuring safety compliance without sacrificing cycle times. Its lightweight design and compact footprint allow for seamless integration into existing workstations, effectively reducing the footprint required for automated cells.
Technical Specifications:
Model: AUBO-iS7
Payload Capacity: 7 kg
Reach Radius: 900 mm
Degrees of Freedom: 6 Axis
Repeatability: ±0.03 mm
Tool Flange Interface: ISO 9409-1-50-4-M6
Input Voltage: 100-240V AC, 50/60Hz
Communication Protocols: Modbus TCP/RTU, PROFINET, Ethernet/IP
IP Rating: IP54
Weight: 21.5 kg
Programming Interface: Drag-to-Teach / GUI-based Scripting
Application Scenarios and Operational Efficiency
In automotive assembly lines, the AUBO-iS7 excels in small-part handling and screw-driving applications. Its precision control enables it to navigate tight spaces within vehicle cockpits, ensuring consistent torque application while minimizing the risk of damage to sensitive interior components. By implementing the iS7, manufacturers typically observe a reduction in downtime associated with manual changeovers, as the drag-to-teach functionality allows operators to re-task the arm for different assembly sequences in minutes rather than hours.
For electronics manufacturing and PCB assembly, the unit’s 0.03 mm repeatability is critical. It provides the steady motion required for high-speed pick-and-place tasks, effectively mitigating the vibrations often found in high-cycle environments. The integration of collaborative safety features ensures that the robot can work alongside human technicians during quality inspection phases, enhancing total line throughput without compromising operator safety. In food packaging, the unit provides clean, repeatable motion for secondary packaging, helping to maintain strict hygiene standards while lowering the need for labor-intensive, repetitive manual labor.
Long-term Value and Series Compatibility
The longevity of the AUBO-iS7 is supported by a robust build quality designed for 24/7 continuous operation. Its energy-efficient motor controllers contribute to lower total cost of ownership (TCO) by minimizing power consumption during peak operational hours. For users seeking variations in reach and payload within the same ecosystem, the AUBO series also includes the AUBO-i3, AUBO-i5, and the larger AUBO-i10 models, allowing for a scalable robotic strategy where multiple units can be managed under a unified control software interface.
When selecting this robot, engineers should note that it is best suited for light-to-medium payload tasks where spatial constraints are high. It may not be the optimal choice for heavy material handling requiring payloads exceeding 10 kg or for environments requiring wash-down IP67/69K ratings without additional protective enclosures. Consult with authorized technical support departments to evaluate the specific mechanical load requirements of your application.
Frequently Asked Questions (FAQ)
Q: How can industrial buyers verify the authenticity of an AUBO-iS7 unit upon delivery?
A: Every unit ships with a unique serial number tied to the factory quality control database. Authorized regional distributors perform a factory-sealed verification check before dispatch. To check real-time stock allocation or request an official quote, contact Beijing Zhongping Technology Co., Ltd. directly.
Q: Can the AUBO-iS7 be integrated into existing PLC architectures using PROFINET?
A: Yes, the system supports major industrial communication protocols including PROFINET, Modbus TCP, and Ethernet/IP. Our technical support department recommends mapping the I/O registers during the initial configuration phase to ensure seamless synchronization with existing line controllers.
Q: What is the recommended strategy for managing a blanket order for multiple robotic units?
A: To mitigate supply chain volatility, our sourcing experts recommend establishing a phased delivery schedule that aligns with your facility expansion. This approach allows for price locking on specific batches and ensures that units from the same production run are allocated to your project.
Q: How do we manage the transition if a specific hardware revision of the iS7 reaches EOL?
A: Our supply chain partners maintain comprehensive cross-reference logs for all robotic components. If a hardware revision is phased out, our engineering team provides a migration path, including firmware compatibility verification and mechanical retrofitting guides to ensure minimal disruption to production.
Q: Does the AUBO-iS7 require a specific calibration certificate for ISO-regulated audits?
A: Yes, each unit is shipped with an individual calibration report confirming repeatability and accuracy metrics. If your facility requires periodic re-calibration for compliance audits, contact our authorized service centers to schedule on-site verification services.
Q: What documentation is required for the international export and customs clearance of this robot?
A: The product is supplied with a comprehensive documentation package, including the Certificate of Conformity (CoC) and a Certificate of Origin. Our logistics coordination team ensures that all HS codes are correctly classified to prevent delays during cross-border transit.
Q: How does the AUBO-iS7 perform in high-EMI environments?
A: The internal shielding of the iS7 is rated for standard industrial electromagnetic environments. However, if the robot is to be deployed near high-frequency induction heaters or heavy-duty motor drives, our application engineering team can provide guidance on grounding protocols and shielded cabling to prevent signal interference.
Q: Can the robot be operated in an environment that requires a derating factor?
A: Yes. In environments with high ambient temperatures or elevated altitudes, the motor performance must be derated to prevent thermal fatigue. Detailed derating curves are available; please provide our technical support department with your specific environmental data to receive an optimized load-duty cycle analysis.
Q: Is it possible to swap the iS7 with a competitor's robot on an existing mounting base?
A: In many cases, yes, provided the mounting hole patterns are compatible. If they are not, our mechanical integration experts can assist in designing a custom adapter plate that maintains the required stiffness and vibrational dampening characteristics of the robotic cell.
Q: Who should be contacted for specialized integration support if the standard manual does not cover our custom end-effector?
A: For non-standard end-effectors, consult our technical support department. They can provide an analysis of the center-of-mass (CoM) and torque requirements to ensure the robot’s joint motors are not subjected to excessive stress, ensuring long-term operational reliability.
FAQ
1.Who are We?
Beijing Zhongping Technology Co., LTD., is a global industrial electrical automation service provider, is a scientific research, design, marketing, technical services, industrial Internet, international import and export services as one of the science and technology companies.
2.What can you buy from us?
PLC, inverter, human-machine interface, hydraulic products, low-voltage power distribution, industrial robots and core components
3.Is the item in stock or need to be purchased from another supplier?
We have a large inventory of goods and have our own warehouse.
4.What advantages do we have over other suppliers?
Our company has a large amount of inventory and a number of warehouses, but also in the country's important industrial provinces and cities with offices and a number of overseas service points. To provide you with intelligent manufacturing one-stop comprehensive services, save efforts, labor and cost.
5.Can you provide 100% new original authentic products?
We only sell new original genuine, no renovation, no fake, only for the original factory original!
6.How long is the delivery time?
If there is a stock, it will take 2-3 working days to ship, if the quantity is large, it will take 5-7 working days after receiving the payment, if it is not a conventional model, it will take some time, we will inform you of the specific delivery time.
7.Is there technical support available?
Of course, we have a professional technical team that can help you solve technical problems.
8.How do we guarantee quality?
We have three processes to control the quality of goods.
1) Our engineers will inspect the production and quality control in the factory regularly.
2) Incoming materials shall be inspected by experienced purchasing engineers before they can be stored.
3) At least 2 people in the logistics department cross-check the goods to be sent before delivery.
9.Can you guarantee the safe and reliable delivery of your products?
Yes, we strictly adopt the international standard packing. We also use special packaging for dangerous goods, and refrigerated shipping for items with temperature requirements. Special item packaging and general cargo standard packaging requirements may incur additional costs.
10.How about the freight?
The cost depends on how you choose to get the goods. Express is usually the fastest but also the most expensive way. Sea freight is the best solution for large quantities of goods. The exact shipping cost depends on the purchase amount、quantity and weight of your order. Please feel free to contact us for more information.
+86 010-64225983
+8613811814778
Building 26, Liyuan Community, Chaoyang District, Beijing, China
