The AUBO-iS20 is a high-payload collaborative robot engineered for heavy-duty box palletizing, functioning as a precision-driven box palletizing robot that integrates advanced safety sensors to ensure seamless human-machine interaction in demanding industrial environments. Designed as a versatile collaboration robot, the AUBO-iS20 addresses the critical need for automated end-of-line packaging where high throughput and workplace safety are non-negotiable. By leveraging an optimized kinematic structure and intelligent sensor suites, this system mitigates the ergonomic risks associated with manual material handling while significantly increasing line efficiency in complex logistics centers and automated production plants.
Technical Specifications
Model: AUBO-iS20
Payload Capacity: 20 kg
Reach Radius: 1750 mm
Repeatability: ±0.05 mm
Degrees of Freedom: 6-Axis
Safety Integration: Integrated Torque/Force Sensors and Safety-Rated Monitored Stop
Communication Protocols: TCP/IP, Modbus TCP, PROFINET, EtherNet/IP
Power Consumption: Rated for energy-efficient industrial power cycles
IP Rating: IP54 (Standard) / IP65 (Optional)
Operating Temperature: 0°C to 50°C
Mounting Options: Floor, Wall, or Ceiling
Performance and Application Dynamics
The AUBO-iS20 is specifically designed to thrive in high-stakes industrial environments where speed and payload capacity often conflict with safety requirements. In food and beverage packaging, this robot maintains consistent cycle times during peak demand, reducing the downtime associated with manual pallet pattern shifts. By implementing sophisticated trajectory planning, the system minimizes mechanical vibration, which is critical when handling fragile or unevenly weighted secondary packaging.
In automotive component logistics, the iS20 demonstrates exceptional reliability during repetitive lifting tasks. Its advanced force-feedback control allows it to interact with human operators in shared workspaces without the need for cumbersome physical safety cages. This capability reduces the overall integration footprint, allowing engineers to optimize floor space in existing production layouts. Furthermore, the robot’s energy-efficient drive system ensures low operational overhead, aligning with modern industrial sustainability mandates.
For engineers looking to standardize their fleet, the AUBO-iS20 serves as the anchor point for a broader automation strategy. It is fully compatible with the broader AUBO-i series, including the AUBO-i3, AUBO-i5, and AUBO-i10 models, allowing for a scalable architecture that grows from small-part handling to heavy palletizing applications.
Engineering and Operational Trust
When deploying the AUBO-iS20, selection must be based on the specific load-center requirements and the required cycle time. It is highly suitable for stable, medium-to-high speed palletizing zones where the robot's 20kg payload capacity can be fully leveraged. It is not recommended for applications involving high-frequency explosive atmosphere exposure unless coupled with specialized protective shrouds that meet specific hazardous location standards.
FAQ
Q: How can procurement departments verify the authenticity and origin of AUBO-iS20 units for large-scale projects?
A: Verification is managed through serial number cross-referencing against the manufacturer's global database. Authorized regional distributors provide a Certificate of Conformity (CoC) and factory-sealed documentation for every unit. To check real-time stock allocation or request an official quote, contact Beijing Zhongping Technology Co., Ltd. directly.
Q: In the event of a blanket order, how are price fluctuations and long-term supply stability addressed?
A: Our sourcing experts utilize a dynamic inventory locking mechanism. By securing batch-specific manufacturing slots, we hedge against market volatility, ensuring that pricing remains locked according to the initial purchase agreement regardless of broader economic fluctuations.
Q: What measures are in place to ensure hardware consistency for existing lines when sourcing additional units?
A: We prioritize hardware version matching by analyzing the specific build revision of your currently installed robot. Our technical support department performs a compatibility audit before shipment to ensure that new units integrate seamlessly with existing field-bus protocols and control cabinets.
Q: What documentation is required for international customs compliance regarding the AUBO-iS20?
A: Each shipment is accompanied by a comprehensive document package, including the Certificate of Origin, Bill of Materials (BOM) conformity, and CE/ISO safety compliance reports. These documents are verified by our logistics team to ensure they meet the specific import requirements of your destination country.
Q: How is the product lifecycle managed in the event of component obsolescence or EOL (End of Life) notifications?
A: When a component reaches the EOL stage, the manufacturer typically provides a minimum 12-month migration notice. Our supply chain specialists track these lifecycles, offering proactive recommendations for compatible hardware replacements or firmware upgrades to ensure zero-downtime transitions.
Q: Can the AUBO-iS20 operate reliably in an environment with high electromagnetic interference (EMI)?
A: Yes, the system features robust shielding and noise-filtering circuits compliant with industrial EMC standards. However, if the site includes high-voltage power lines or heavy welding equipment, our technical support department recommends a site-specific shielding assessment to ensure total signal integrity.
Q: What is the recommended derating factor when operating the iS20 at maximum payload and reach continuously?
A: Operating at maximum payload and reach simultaneously increases the duty cycle on the joint actuators. For 24/7 continuous operation, we generally recommend a 10-15% duty cycle reduction to prevent premature thermal degradation. A custom thermal analysis report can be generated by our engineering team based on your specific duty cycle.
Q: Is the AUBO-iS20 compatible with existing PLC systems that use proprietary communication protocols?
A: The robot is highly interoperable, supporting major industrial protocols like PROFINET and EtherNet/IP. If your PLC architecture relies on a legacy or non-standard protocol, our technical support department can assist in configuring a gateway module to translate communication signals into a format compatible with the robot controller.
Q: How should the integration team approach the mechanical mounting of the iS20 in vibration-heavy automotive assembly lines?
A: The mounting surface must be calculated based on the maximum dynamic load generated during full-speed stops. We recommend an analysis of the mounting plate stiffness and bolt torque specifications provided in our technical manual. For unconventional mounting configurations, please submit your mechanical drawings to our engineering consultants for a safety compliance review.
Q: Who should be contacted for specialized firmware optimization or troubleshooting once the unit is deployed?
A: For site-specific technical challenges, contact our authorized regional distributors. They provide tiered support, ranging from basic parameter adjustments to advanced firmware diagnostics, ensuring that your automated system maintains peak performance. For complex integration audits, feel free to reach out to the technical support department at Beijing Zhongping Technology Co., Ltd. for escalated engineering intervention.
FAQ
1.Who are We?
Beijing Zhongping Technology Co., LTD., is a global industrial electrical automation service provider, is a scientific research, design, marketing, technical services, industrial Internet, international import and export services as one of the science and technology companies.
2.What can you buy from us?
PLC, inverter, human-machine interface, hydraulic products, low-voltage power distribution, industrial robots and core components
3.Is the item in stock or need to be purchased from another supplier?
We have a large inventory of goods and have our own warehouse.
4.What advantages do we have over other suppliers?
Our company has a large amount of inventory and a number of warehouses, but also in the country's important industrial provinces and cities with offices and a number of overseas service points. To provide you with intelligent manufacturing one-stop comprehensive services, save efforts, labor and cost.
5.Can you provide 100% new original authentic products?
We only sell new original genuine, no renovation, no fake, only for the original factory original!
6.How long is the delivery time?
If there is a stock, it will take 2-3 working days to ship, if the quantity is large, it will take 5-7 working days after receiving the payment, if it is not a conventional model, it will take some time, we will inform you of the specific delivery time.
7.Is there technical support available?
Of course, we have a professional technical team that can help you solve technical problems.
8.How do we guarantee quality?
We have three processes to control the quality of goods.
1) Our engineers will inspect the production and quality control in the factory regularly.
2) Incoming materials shall be inspected by experienced purchasing engineers before they can be stored.
3) At least 2 people in the logistics department cross-check the goods to be sent before delivery.
9.Can you guarantee the safe and reliable delivery of your products?
Yes, we strictly adopt the international standard packing. We also use special packaging for dangerous goods, and refrigerated shipping for items with temperature requirements. Special item packaging and general cargo standard packaging requirements may incur additional costs.
10.How about the freight?
The cost depends on how you choose to get the goods. Express is usually the fastest but also the most expensive way. Sea freight is the best solution for large quantities of goods. The exact shipping cost depends on the purchase amount、quantity and weight of your order. Please feel free to contact us for more information.
+86 010-64225983
+8613811814778
Building 26, Liyuan Community, Chaoyang District, Beijing, China
