How to maintain MCGS touch screen
Published:2023-02-09 14:36:33
1. Wipe the phone screen with a dry cloth before opening it every day.
2. Drinks or drops falling on the screen will cause the software to stop the reaction. This is because water droplets and fingers have similar properties and it is necessary to wipe the water droplets.
3, Kunlun mcgs screen program can automatically detect how much dust, too much dust will reduce the sensitivity of the touch screen, just wipe the screen with dry cloth and alcohol.
4. Wipe the touch screen with a dirty, greasy fingerprint.
5, strictly in accordance with the relevant rules to open and close the system power supply, that is, to open a power supply sequence is: monitor, audio, host. Turn off the power in reverse order.
6, generate a large number of temporary files on the hard disk, if you often do not exit Windows, the MCGS mcgs touch screen will be periodically closed directly, therefore, you need to regularly run the disk scan program to scan the hard disk error, for example, in the order specified, click the four corners.
7, pure touch screen control program design does not need to go through the mouse cursor, cursor company will only distract the user.
8. Choose a simple mouse-prevention mode, which is sufficient for your application, since complex modes require sacrificing latency and system resources.
9. In windows, users can access other systems and start slower applications at the same time. The solution is to modify the system, file: shell progman, shell explorer.exe, Exe (on windows 95) is changed directly to an Exe file, however, the application should be able to exit the window directly, otherwise the system will not be able to exit.
10. In harsh environments, periodically open, clean and reflect stripes on the inner surface of the MCGS mcgs touch screen. The specific method is: open the cover side of the machine to find the release mechanism, the opening mechanism is released by the bolt, lift the front part of the machine head, the control card can be seen, the touch screen, the touch screen unplug, and take out the head and the head retracted by the touch screen. In the fixed touch screen method, after a careful look, take out the clean touch screen, take care not to use cardboard or hard cloth, do not scratch the reflective stripes, in the reverse order to restore the original configuration.
-
202212-29Siemens loads items into a memory card in transfer mode
Loads items to a memory card in transfer modeStep 1: Set the memory card to "transfer card" mode according to the above method. You are advised to clear all files from the memory card before···
-
202308-28RKC Thermostat -What are the common faults of thermostat?
1, the power does not appear. This kind of problem first confirm whether the power supply is available and whether the power supply is matched with the power supply required by the thermostat, and the···
-
202307-20How to disassemble the five or six axes of the Eston robot?
1. Open the shell of the robot to reveal the motor base.2. Use a screwdriver or wrench to remove the screws on the motor base.3. Remove the screw, lift the motor base, and remove it from the robot.4. ···
-
202303-02Mitsubishi servo motors one-button adjustment function
When different servo motors are installed on the machine for the first time, they will occasionally show a poor match with the machinery during operation, which will lead to vibration, noise and other···
-
202302-08Schneider PLC control cabinet installation wiring method
(1) When placing signal cables with different properties into the same conduit, they must be isolated② Try to avoid multiple power lines contained in the same catheter. If necessary, a partition shal···
+8618621383628
+8613811814778
info@zhongpingtech.com
Building 26, Liyuan Community, Chaoyang District, Beijing, China