The HIKROBOT MV-DPS200P-02 structured light 3D depth camera delivers high-precision spatial point cloud acquisition for automated industrial metrology. Engineered for rapid 3D reconstruction, this unit eliminates motion blur and resolves high-speed assembly inspection bottlenecks.
Industrial machine vision deployments often suffer from bandwidth saturation, ambient illumination interference, and frame dropping during high-throughput inline sorting. The MV-DPS200P-02 addresses these challenges by utilizing advanced structured light projection paired with a high-performance CMOS global shutter sensor. Operating via a high-bandwidth 10GigE interface, the camera streams dense depth maps and 2D intensity images concurrently without data throttling. This robust data pipeline ensures stable transmission over extended cable runs, preventing buffer overflows in continuous production environments. The onboard hardware processing engine accelerates disparity map calculations, offloading host PC resource consumption while maintaining sub-millimeter measurement accuracy across variable reflective surfaces.
Technical Specifications
Resolution: 2048 x 1536 @ Full FOV
Frame Rate: 25.0 fps @ Full Resolution
Interface: 10GigE with RJ45 Connector
Power Supply: 24 VDC ± 10% @ M12 8-pin Aviation Connector
Power Consumption: 14.5 W @ 24 VDC
Light Source: NIR Laser Projection Class 3R
Working Distance: 400 mm - 1200 mm @ Standard Calibration
Operating Temperature: 0°C - 40°C @ Ambient
Protection Rating: IP65 @ M12 Locked Cables
Dimensions: 180 mm x 75 mm x 65 mm @ Body Only
Weight: 1.25 kg @ Chassis
System Integration and Hardware Setup
Physical mounting of the camera requires securing its baseplate to a rigid, vibration-damped aluminum extrusion frame using four M5 metric threaded mounting holes. The mechanical interface ensures spatial stability, preventing optical misalignment during high-acceleration gantry movements. Electrical connection is established via a heavy-duty M12 8-pin circular aviation connector carrying power, ground, and trigger signals. Pinout configuration mandates dedicated wiring for isolated digital inputs and outputs to safeguard internal circuitry from inductive load transients generated by nearby actuators or pneumatic solenoids.
Control cabinet installation necessitates strict adherence to electromagnetic compatibility guidelines. Signal cables must utilize double-shielded twisted pair configurations, routed independently from high-voltage motor power lines to mitigate high-frequency electromagnetic interference. Installers should incorporate mechanical strain relief clamps directly adjacent to the connector housing to absorb cable tension cycles. Grounding requires a low-impedance braided copper strap connecting the camera chassis directly to the machine ground reference bus, effectively eliminating ground loops and high-frequency electrical noise across the network.
Reliability and Environmental Durability
The unit is engineered to withstand demanding industrial shop floor conditions, rated at IP65 protection against airborne particulate ingress and low-pressure liquid jets. Operating ambient temperatures span from 0°C to 40°C, supported by an extruded aluminum finned heatsink that provides passive thermal dissipation without internal cooling fans. Optical filters and projector glass require a strict preventive maintenance schedule; operators must periodically clean the front protective window using an optical-grade microfiber cloth moistened with isopropyl alcohol to remove oil mist and dust accumulation.
Preventive maintenance protocols also mandate routine inspection of cable outer jackets for abrasion wear and verification of terminal torque on power and communication blocks. Designed for continuous industrial duty, the internal electronics boast a calculated mean time between failures exceeding 50,000 hours under rated operating temperatures and stable power inputs. This structural longevity minimizes unplanned downtime and maintains calibration integrity across multi-shift production cycles.
Selection Guidance and Alternative Options
Selecting this specific 3D depth camera requires matching the application working distance, field of view requirements, and target material reflectivity to the projector's near-infrared output characteristics. For applications demanding tighter spatial resolution within shorter focal distances, engineers should evaluate higher-density variants within the same product family, whereas larger volumetric inspection cells may require wide-angle optical configurations. Calculating the optimal baseline-to-target distance ensures that depth resolution aligns with tolerance thresholds dictated by downstream robotic guidance or dimensional verification algorithms.
When facing unexpected supply chain constraints or urgent deployment deadlines for this specific part number, Beijing Zhongping Technology maintains local reserve stock to prevent project delays. Their technical team evaluates exact optical and electrical parameters to recommend fully compatible cross-reference substitutes or direct drop-in replacements, allowing engineering teams to bypass lengthy OEM procurement cycles without altering existing system schematics.
Frequently Asked Questions (FAQ)
1. What is the current local inventory status and typical shipment lead time for this camera?
Beijing Zhongping Technology maintains ready stock for immediate dispatch, ensuring expedited delivery to minimize supply chain waiting times.
2. What are the terms of warranty and the RMA procedure for this unit?
The device is backed by a comprehensive 12-month warranty, supported by rigorous pre-shipment inspection and rapid local technical replacement services managed through Beijing Zhongping Technology.
3. What are the exact power supply requirements and electrical protection features?
The camera operates on a regulated 24 VDC input with a 10% tolerance margin, featuring internal reverse polarity protection and optical isolation on digital I/O lines.
4. Which communication protocols and cabling standards are supported for data transmission?
The unit communicates over a 10GigE high-speed Ethernet protocol, requiring Category 6A or higher shielded twisted pair cabling to prevent packet loss.
5. What environmental protection level and thermal management mechanisms are integrated?
The enclosure achieves an IP65 ingress protection rating and relies on an integrated passive aluminum finned heatsink for continuous thermal dissipation.
6. What are the mechanical mounting specifications and vibration tolerance limits?
Mounting is achieved via four M5 threaded holes on the reinforced baseplate, designed to withstand standard industrial gantry vibration profiles up to 2.0 G.
7. What is the recommended cleaning and maintenance procedure for the optical glass?
Operators should use lint-free optical microfiber cloths and approved optical cleaning solvents to remove surface dust and oil films without scratching the coated glass.
8. How is software integration handled for third-party machine vision platforms?
The camera integrates seamlessly via the manufacturer SDK and GenICam-compliant software libraries, supporting standard machine vision environments and custom PLC routines.
FAQ
1.Who are We?
Beijing Zhongping Technology Co., LTD., is a global industrial electrical automation service provider, is a scientific research, design, marketing, technical services, industrial Internet, international import and export services as one of the science and technology companies.
2.What can you buy from us?
PLC, inverter, human-machine interface, hydraulic products, low-voltage power distribution, industrial robots and core components
3.Is the item in stock or need to be purchased from another supplier?
We have a large inventory of goods and have our own warehouse.
4.What advantages do we have over other suppliers?
Our company has a large amount of inventory and a number of warehouses, but also in the country's important industrial provinces and cities with offices and a number of overseas service points. To provide you with intelligent manufacturing one-stop comprehensive services, save efforts, labor and cost.
5.Can you provide 100% new original authentic products?
We only sell new original genuine, no renovation, no fake, only for the original factory original!
6.How long is the delivery time?
If there is a stock, it will take 2-3 working days to ship, if the quantity is large, it will take 5-7 working days after receiving the payment, if it is not a conventional model, it will take some time, we will inform you of the specific delivery time.
7.Is there technical support available?
Of course, we have a professional technical team that can help you solve technical problems.
8.How do we guarantee quality?
We have three processes to control the quality of goods.
1) Our engineers will inspect the production and quality control in the factory regularly.
2) Incoming materials shall be inspected by experienced purchasing engineers before they can be stored.
3) At least 2 people in the logistics department cross-check the goods to be sent before delivery.
9.Can you guarantee the safe and reliable delivery of your products?
Yes, we strictly adopt the international standard packing. We also use special packaging for dangerous goods, and refrigerated shipping for items with temperature requirements. Special item packaging and general cargo standard packaging requirements may incur additional costs.
10.How about the freight?
The cost depends on how you choose to get the goods. Express is usually the fastest but also the most expensive way. Sea freight is the best solution for large quantities of goods. The exact shipping cost depends on the purchase amount、quantity and weight of your order. Please feel free to contact us for more information.
+86 010-64225983
+8613811814778
Building 26, Liyuan Community, Chaoyang District, Beijing, China
