The SIASUN SA10A-10/0.80 4 axis robotic arm is a specialized scara robot manipulator engineered for high-speed automated palletizing and material handling tasks. Operating within industrial production lines, this unit provides a reach of 800mm to facilitate precise component placement and load transfer. Maintaining optimal performance requires scheduled lubrication of joint actuators and periodic inspection of the controller communication interface. By integrating robust kinematics and scalable motion control, this manipulator addresses the mechanical requirements of dense manufacturing environments. It serves as a core component for assembly sequences where rapid cycle times and positioning accuracy are fundamental operational metrics.
Product Type & Category Positioning
This equipment belongs to the SCARA (Selective Compliance Assembly Robot Arm) category, characterized by high rigidity in the vertical axis and flexibility in horizontal motion. Within the industrial automation hierarchy, it functions as a mid-range handling solution designed for planar trajectory tasks. It differs from six-axis industrial robots by focusing on speed and footprint efficiency rather than spatial dexterity. Following this classification, the SA10A-10/0.80 serves as an integration-ready module for facilities transitioning from manual palletizing to automated systems.
Technical Specifications
Model: SA10A-10/0.80
Degrees of Freedom: 4
Max Reach: 800 mm
Payload Capacity: 10 kg
Repeatability: ±0.02 mm
Axis 1 Motion Range: ±150 °
Axis 2 Motion Range: ±150 °
Axis 3 Stroke: 200 mm
Axis 4 Rotation: ±360 °
Control System: SIASUN Proprietary Architecture
Communication Interface: EtherCAT/PROFINET
Protection Rating: IP54
Weight: 45 kg
Power Supply: 220 V AC
Technical Highlights
The structural design of the SA10A-10/0.80 emphasizes high-rigidity aluminum alloy casting to minimize vibration during high-speed deceleration. This material choice ensures that the manipulator maintains structural integrity even when operating at maximum payload capacity throughout continuous duty cycles.
Moreover, the internal drive system utilizes high-precision harmonic gear reducers to achieve repeatable positioning within a 0.02mm threshold. These components are sealed to prevent particulate ingress, which directly extends the interval between comprehensive maintenance inspections.
Additionally, the integration of an open-architecture control interface allows for seamless synchronization with secondary peripheral devices. This capability enables operators to program complex motion paths without requiring extensive proprietary software training or external hardware bridges.
Application Scenarios
Automated Palletizing: This unit executes stacking patterns with a cycle time reduced by up to 25% compared to manual loading methods. It maintains a constant trajectory, ensuring uniform pallet density and stability for downstream logistics. Precision Material Handling: The manipulator manages component transfer between conveyors and assembly stations with a repeatable accuracy of ±0.02mm. This precision minimizes drop errors and reduces material waste during high-speed sorting operations. Electronics Assembly: In tasks involving small part insertion, the scara robot configuration provides the necessary horizontal compliance to prevent mechanical binding. Its rapid acceleration profiles enable throughput rates exceeding 60 units per minute in controlled factory environments.
Selection Recommendations
Suitable Application: High-speed circuit board assembly lines where cycle times are ≤1.5s per unit, required repeatability is ±0.02mm, and the operating environment is climate-controlled. This robot effectively manages the frequent start-stop motions inherent in such processes without exceeding duty cycle limits. Unsuitable Application: Heavy-duty foundry processing or metal grinding tasks where the unit is exposed to high-pressure debris or shock loads exceeding 150% of the nominal capacity. The IP54 rating is insufficient for environments with conductive metal dust or high-moisture mist. Comparison Note: For projects requiring a larger workspace, consider the SIASUN SA10A-10/1000, which offers a 1000mm reach while retaining the same 10kg payload capacity as the SA10A-10/0.80.
FAQ
1. What is the standard lead time, and are units currently in stock?
Orders for the SA10A-10/0.80 typically ship within 15 to 25 working days upon receipt of payment. We maintain a limited inventory of core units, allowing for immediate dispatch for standard configurations. For bulk orders exceeding 5 units, our logistics department coordinates a staggered delivery schedule to match your facility integration timeline. You should contact our sales office to confirm the exact availability of the current batch. Beijing Zhongping Technology ensures all units undergo a 24-hour burn-in test before leaving our facility to guarantee operational reliability upon arrival at your site.
2. What is the total weight and the required floor space for installation?
The manipulator has a net weight of 45 kg, facilitating installation on standard industrial platforms. The base footprint requires a mounting surface of at least 300mm by 300mm to ensure stability during high-speed motion. We recommend utilizing M12 high-tensile bolts for securing the unit to a vibration-dampened steel base. Our installation guide provides detailed anchor layouts and load distribution diagrams for your engineering team. Adhering to these specifications prevents resonance and maintains the stated repeatability precision during the robot's entire operational lifespan.
3. Is the control software compatible with existing PLC systems?
The controller supports standard communication protocols including EtherCAT and PROFINET for seamless integration. You can map the robot registers directly into your existing PLC logic for unified command and monitoring. We provide a comprehensive communication manual and sample code snippets to expedite the handshake configuration process. If you require specialized communication drivers for legacy hardware, our technical support team provides custom integration consultancy for an additional fee. This flexibility ensures the SA10A-10/0.80 becomes a native component of your existing manufacturing ecosystem.
4. How do I request a quote for this specific robotic arm model?
Pricing for this model ranges from $9,600 to $18,700 USD, depending on the integrated gripper options and control software packages. Prices fluctuate due to exchange rates, tariffs, and factory adjustments. For an accurate quotation tailored to your project requirements, contact Beijing Zhongping Technology directly. Our team provides detailed cost breakdowns including shipping, insurance, and custom duty estimates upon request. We recommend providing your site location and project timeline to receive a quote that reflects actual landed costs and current market conditions.
5. Does the purchase include on-site installation support?
Standard purchase terms include remote technical guidance and access to our digital knowledge base. We offer optional on-site installation and commissioning services performed by certified engineers for an additional fee. This service covers mechanical leveling, electrical connectivity validation, and initial motion path optimization for your specific palletizing task. If you choose to handle installation internally, our team is available for real-time video consultation during the critical startup phase. We prioritize your operational continuity and provide 24/7 technical assistance for any setup queries during the installation week.
6. What are the warranty terms and return policy for the SA10A-10/0.80?
The product carries a 12-month factory warranty covering manufacturing defects in the actuators and controller. Should a component fail under normal operating conditions, we dispatch replacement parts via express courier within 48 hours. Warranty claims require the submission of the robot’s serial number and a diagnostic report from your maintenance staff. We do not accept returns for used units unless they are deemed non-functional by our technical assessment team upon delivery. Please inspect the packaging for transit damage immediately upon arrival and document any discrepancies with the carrier.
7. What type of maintenance is required for long-term reliability?
Regular maintenance involves lubricating the joint gearboxes every 2,000 operational hours using high-grade synthetic grease. We recommend inspecting the cable harness for signs of fatigue every 6 months, particularly the cables near the articulation joints. The air filtration system in the controller cabinet requires cleaning or replacement every quarter to prevent overheating. Following these steps significantly reduces the likelihood of unscheduled downtime. Our support portal provides a downloadable maintenance checklist and video tutorials for these specific tasks.
8. How can I obtain spare parts after the warranty period expires?
We maintain a comprehensive inventory of essential spare parts, including actuators, motors, and cable sets. You can order these components directly through our support portal by referencing the part number found in your manual. We guarantee the availability of critical components for at least 7 years from the date of your purchase. For older units, we provide custom machining or component retrofitting services for an additional fee to keep your equipment running. Our logistics department ensures prompt international shipping to minimize the impact of any hardware failure.
9. Are there specific power or environmental requirements for the operation?
The unit operates on a standard 220 V AC power supply with a steady frequency of 50/60 Hz. The installation environment must maintain a temperature range between 0 °C and 45 °C and humidity levels below 80%. We advise installing a dedicated circuit breaker and a surge protector to shield the controller from industrial power spikes. If your facility environment contains excessive oil mist or dust, we suggest implementing an additional positive pressure enclosure for the base. Proper environmental management is essential to prevent premature degradation of internal sensors and electronics.
10. Can this robot be customized for specific gripper or end-effector attachments?
The wrist flange is designed to ISO 9409-1 standards, enabling the attachment of various vacuum or mechanical grippers. You can integrate third-party end-effectors easily by connecting them through the available I/O ports on the robot's arm. Our engineering team assists with load calculations to ensure your specific gripper does not exceed the 10 kg payload limit or torque restrictions. For complex applications requiring multi-tool changes, we provide design consultancy for an additional fee. We aim to ensure your end-of-arm tooling is fully optimized for the speed and precision requirements of your specific palletizing cycle.
FAQ
1.Who are We?
Beijing Zhongping Technology Co., LTD., is a global industrial electrical automation service provider, is a scientific research, design, marketing, technical services, industrial Internet, international import and export services as one of the science and technology companies.
2.What can you buy from us?
PLC, inverter, human-machine interface, hydraulic products, low-voltage power distribution, industrial robots and core components
3.Is the item in stock or need to be purchased from another supplier?
We have a large inventory of goods and have our own warehouse.
4.What advantages do we have over other suppliers?
Our company has a large amount of inventory and a number of warehouses, but also in the country's important industrial provinces and cities with offices and a number of overseas service points. To provide you with intelligent manufacturing one-stop comprehensive services, save efforts, labor and cost.
5.Can you provide 100% new original authentic products?
We only sell new original genuine, no renovation, no fake, only for the original factory original!
6.How long is the delivery time?
If there is a stock, it will take 2-3 working days to ship, if the quantity is large, it will take 5-7 working days after receiving the payment, if it is not a conventional model, it will take some time, we will inform you of the specific delivery time.
7.Is there technical support available?
Of course, we have a professional technical team that can help you solve technical problems.
8.How do we guarantee quality?
We have three processes to control the quality of goods.
1) Our engineers will inspect the production and quality control in the factory regularly.
2) Incoming materials shall be inspected by experienced purchasing engineers before they can be stored.
3) At least 2 people in the logistics department cross-check the goods to be sent before delivery.
9.Can you guarantee the safe and reliable delivery of your products?
Yes, we strictly adopt the international standard packing. We also use special packaging for dangerous goods, and refrigerated shipping for items with temperature requirements. Special item packaging and general cargo standard packaging requirements may incur additional costs.
10.How about the freight?
The cost depends on how you choose to get the goods. Express is usually the fastest but also the most expensive way. Sea freight is the best solution for large quantities of goods. The exact shipping cost depends on the purchase amount、quantity and weight of your order. Please feel free to contact us for more information.
+86 010-64225983
+8613811814778
Building 26, Liyuan Community, Chaoyang District, Beijing, China
