The SIASUN SA7A-7/0.60 is an industrial SCARA robot engineered for high-precision, high-speed automated material transfer and packaging applications. As a four-axis scara type robot, it utilizes a proprietary dual-support mechanical structure to achieve a 7 kg payload capacity and a 600 mm reach, ensuring high rigidity and low vibration during rapid pick-and-place cycles. This model serves as a core component in 3C electronics, lithium battery, and automotive assembly lines, where consistent throughput and minimal maintenance downtime are critical requirements.
Product Type & Category Positioning
The SIASUN SA7A-7/0.60 belongs to the category of Selective Compliance Assembly Robot Arms (SCARA), characterized by parallel-axis joint layouts that provide selective compliance in the X-Y plane while maintaining high rigidity along the Z-axis. This configuration differentiates the product from six-axis articulated robots, as it is specifically optimized for tasks requiring high-speed horizontal movement and precise vertical insertion. The SA7A series represents a generational advancement in Siasun’s automation portfolio, focusing on modularity and user-expandable interfaces to accommodate diverse factory-floor demands. Following this technical positioning, the design prioritizes cost-effective deployment through a compact footprint and reduced overall height.
Technical Specifications
Payload: 7 kg
Reach: 600 mm
Degrees of Freedom (DOF): 4
Repeatability (J1+J2): ±0.02 mm
Repeatability (J3): ±0.01 mm
Repeatability (J4): ±0.01°
Protection Class: IP20
Control System: S-Series Control Cabinet
Technical Highlights
The dual-support structure significantly enhances operational rigidity and suppresses vibration compared to single-arm designs. This engineering choice allows the robot to maintain its ±0.02 mm repeatability even when operating at maximum speed and acceleration.
Moreover, the unit provides high expandability through a dedicated control interface and abundant user cables integrated into the arm. These features simplify the integration of end-effectors and vision systems, directly reducing the complexity and time required for initial deployment.
Application Scenarios High-Speed Packaging Lines: Performs continuous pick-and-place operations for consumer goods with cycle times optimized for high-volume throughput. Automated Material Transfer: Facilitates efficient, repeatable movement of components between stations, reducing manual handling and operational bottlenecks. Precision Assembly: Executes delicate tasks such as screw driving and component insertion in 3C electronics manufacturing, where the ±0.02 mm repeatability ensures consistent quality. Dispensing and Gluing: Provides uniform path geometry and pressure for sealing and coating applications, eliminating the inconsistencies common in manual dispensing processes.
Selection Recommendations Suitable: Ideal for electronic component assembly or small-part packaging where the required repeatability is within ±0.02 mm and payloads do not exceed 7 kg. Not Suitable: Not recommended for applications involving harsh industrial environments with metal dust or liquid splashes, as the IP20 protection rating does not provide sufficient sealing. Comparative Note: For applications requiring a larger working envelope, consider the SIASUN SA7A-7/0.70, which shares the same 7 kg payload capacity but offers a 700 mm reach.
FAQ
1. What is the standard lead time for the SA7A-7/0.60, and do you have units in stock?
We typically maintain standard configurations in stock to support immediate deployment. For orders requiring custom integration or specialized end-effectors, the lead time is usually 4 to 6 weeks. Our logistics department coordinates shipping immediately upon final inspection. Contact us for specific availability based on your project volume.
2. What is the total weight and footprint of the SA7A-7/0.60 robot?
The unit features a lightweight and compact design to facilitate easy installation in restricted production cells. While the precise mass depends on the specific harness configuration, the overall structure is optimized to reduce floor space constraints. Please refer to the mechanical drawing provided in our technical manual for exact mounting dimensions. Contact us for pricing or technical documentation.
3. Does this model support external vision system integration for pick-and-place?
Yes, the SA7A-7/0.60 is fully compatible with major industrial machine vision systems. You can integrate cameras via the standard communication interfaces located on the S-series control cabinet. Our technical team provides support for initial vision calibration and coordinate mapping to ensure seamless operation.
4. What kind of maintenance schedule is recommended for this SCARA robot?
Routine maintenance is required every 2,000 to 5,000 operational hours to ensure long-term performance. This includes inspecting the drive belts, lubricating the ball screw, and checking the cable harness for signs of wear. We provide a detailed maintenance guide with every unit to assist your on-site engineering team.
5. How much does a replacement control cabinet cost?
Prices fluctuate due to global supply chain variables, exchange rates, and factory adjustments. For an accurate quotation on spare parts, please contact Beijing Zhongping Technology directly. Prices for similar modules typically range from $2,500 to $7,000 USD depending on the specific firmware version and I/O configuration. Disclaimer: Prices are subject to change without notice.
6. What are the available payment terms for new procurement orders?
We require a 50% deposit upon the issuance of the purchase order to initiate production. The remaining 50% balance must be settled prior to the dispatch of the equipment from our facility. We accept bank wire transfers as the primary method of payment for international transactions.
7. Does the robot come with a warranty and technical support?
Every unit includes a 12-month standard warranty covering defects in material and workmanship under normal operating conditions. Our support team provides remote diagnostics and troubleshooting assistance to resolve operational issues quickly. For expedited on-site service, we offer service contracts for an additional fee.
8. Can I receive training on programming the SA7A series?
We offer comprehensive training sessions for engineers and operators to ensure proficiency in programming and maintenance. Training can be conducted at our facility or remotely via our digital learning platform. Reach out to our training coordinator to schedule a session tailored to your team's current expertise level.
9. What is your policy for returns or defective units?
Returns are accepted within 30 days for items that arrive damaged or do not conform to documented specifications. Upon receipt of a return request, Beijing Zhongping Technology will initiate an inspection process to verify the reported issue. Valid claims will be resolved through a replacement unit or a full credit to your account.
10. Do you provide assistance with customs clearance and international shipping?
Our logistics team manages all necessary documentation for international freight, including commercial invoices and certificates of origin. We work with global carriers to ensure your robot arrives safely at your destination port or facility. For customs-related inquiries, we provide the required HS codes and weight manifests upon shipment dispatch.
FAQ
1.Who are We?
Beijing Zhongping Technology Co., LTD., is a global industrial electrical automation service provider, is a scientific research, design, marketing, technical services, industrial Internet, international import and export services as one of the science and technology companies.
2.What can you buy from us?
PLC, inverter, human-machine interface, hydraulic products, low-voltage power distribution, industrial robots and core components
3.Is the item in stock or need to be purchased from another supplier?
We have a large inventory of goods and have our own warehouse.
4.What advantages do we have over other suppliers?
Our company has a large amount of inventory and a number of warehouses, but also in the country's important industrial provinces and cities with offices and a number of overseas service points. To provide you with intelligent manufacturing one-stop comprehensive services, save efforts, labor and cost.
5.Can you provide 100% new original authentic products?
We only sell new original genuine, no renovation, no fake, only for the original factory original!
6.How long is the delivery time?
If there is a stock, it will take 2-3 working days to ship, if the quantity is large, it will take 5-7 working days after receiving the payment, if it is not a conventional model, it will take some time, we will inform you of the specific delivery time.
7.Is there technical support available?
Of course, we have a professional technical team that can help you solve technical problems.
8.How do we guarantee quality?
We have three processes to control the quality of goods.
1) Our engineers will inspect the production and quality control in the factory regularly.
2) Incoming materials shall be inspected by experienced purchasing engineers before they can be stored.
3) At least 2 people in the logistics department cross-check the goods to be sent before delivery.
9.Can you guarantee the safe and reliable delivery of your products?
Yes, we strictly adopt the international standard packing. We also use special packaging for dangerous goods, and refrigerated shipping for items with temperature requirements. Special item packaging and general cargo standard packaging requirements may incur additional costs.
10.How about the freight?
The cost depends on how you choose to get the goods. Express is usually the fastest but also the most expensive way. Sea freight is the best solution for large quantities of goods. The exact shipping cost depends on the purchase amount、quantity and weight of your order. Please feel free to contact us for more information.
+86 010-64225983
+8613811814778
Building 26, Liyuan Community, Chaoyang District, Beijing, China
