New features of Siemens SIMATIC S7-1200 PLC V2.0
Published:2023-02-17 16:26:27
In addition to the existing product features, SIMATIC S7-1200 V2.0 adds the following mechanisms and features:
Integrated PROFINET-IO controller interface with integrated PROFINET interface
Profibus DP master station (via communication module)
Profibus DP slave station (via communication module)
A Web server with standard Internet sites
Integrate user Web sites in a Web server
Data logging function
RTM (run time counter)
S7 Communication (Client)
Enhanced PID function for Closed-loop Controller (3-point controller)
MC_Commandtable is used to process commands in the table, enhancing the motion control of the PLCopen envelope
-
202301-09
Schneider frame circuit breaker MT circuit breaker failed to close the switch problem
Schneider structural circuit breaker has not stored energy (check the power supply of the energy storage motor, if normal check whether it can be manually stored energy)MX shunt coil live (disconnect ···
-
202212-29
Test method for Delta Circuit breakers AC contactors and frequency converters
1. Circuit breakerThe circuit breaker is a device that can be operated manually or automatically. It is used to control the on-off of the system power supply in the circuit system of the device. When ···
-
202301-31
Influence of Delta impulse current on frequency converter
In the process of maintenance of frequency converter, it is found that due to the back electromotive force in the stator winding, the electromotive force in the motor under the condition of synchronou···
-
202305-05
Delta inverter long-term idle points for attention
After the frequency converter is used for more than half a year, if the equipment is to be run again, the chance of damage may be greatly increased because of the placing environment, the service life···
-
202308-28
RKC Thermostat -What are the common faults of thermostat?
1, the power does not appear. This kind of problem first confirm whether the power supply is available and whether the power supply is matched with the power supply required by the thermostat, and the···