Engineered for heterogeneous industrial environments, the LX-CM026 protocol converter facilitates deterministic data exchange between EtherCAT networks and PROFINET architectures. Beijing Zhongping Technology provides robust logistics support for this gateway to streamline system integration across automation cells.
Deploying disparate industrial networks often introduces communication bottlenecks, particularly when linking high-speed motion controllers with standard field devices. The LX-CM026 gateway addresses this challenge by functioning as an EtherCAT slave device on the primary controller side, such as a local LX series PLC, while simultaneously operating as a PROFINET master to manage downstream field instrumentation. This dual-role operational architecture eliminates the need for expensive multi-protocol controller upgrades by translating real-time cyclical data packets directly at the network boundary. Industrial automation engineers frequently encounter integration hurdles when disparate vendor ecosystems fail to share a native communication layer. By processing protocol frames through dedicated internal memory buffers, the unit maintains stable telegram transmission rates and mitigates packet jitter across extended industrial runs.
Technical Specifications
Device Model: LX-CM026 @ Standard Configuration
Primary Protocol Function: EtherCAT Slave to PROFINET Master @ Full Duplex
Mounting Type: DIN Rail Mount @ 35 mm Standard Profile
Enclosure Material: Flame Retardant Engineering Plastic @ IP20 Protection Rating
Operating Temperature Range: -20°C - 60°C @ Non-Condensing Humidity
Storage Temperature Range: -40°C - 85°C @ Relative Humidity 5% - 95%
Power Supply Voltage: 24 VDC ± 20% @ Reverse Polarity Protection
Power Consumption: 4.5 W @ 24 VDC Maximum Load
Communication Interface EtherCAT: Dual RJ45 Ports @ 100 Mbps Full Duplex
Communication Interface PROFINET: Dual RJ45 Ports @ 100 Mbps Real-Time IRT/RT
Diagnostic Indicators: LED Status Array @ RUN, ERR, LINK, ACT
Data Mapping Capacity: Up to 1024 Bytes Input / Output Buffer @ Default Configuration
Dimensions: 105 mm x 90 mm x 40 mm @ Excluding Connectors
Net Weight: 250 g @ Approximate Mass
System Integration and Hardware Setup
Physical installation of the LX-CM026 gateway relies on standard 35 mm DIN rail mounting inside control cabinets, ensuring secure mechanical anchoring in high-vibration environments. Power distribution requires a stable 24 VDC source connected through the removable screw terminal block, featuring built-in transient voltage suppression and reverse polarity defense. Network cabling demands shielded twisted pair Category 5e or higher Ethernet cables to maintain signal integrity against electromagnetic interference generated by nearby variable frequency drives and high-voltage contactors. The dual RJ45 ports on both the EtherCAT and PROFINET sides support line topologies without requiring external network switches, thereby reducing propagation delay. Proper grounding of the DIN rail and cable shields to the cabinet backplane establishes a low-impedance path for high-frequency noise dispersion, preventing ground loops and communication dropouts.
Reliability and Environmental Durability
Designed for continuous industrial operation, the LX-CM026 withstands ambient temperatures ranging from -20°C to 60°C without active cooling fans, relying instead on passive thermal convection through its ventilated housing profile. The IP20-rated enclosure protects internal circuitry from accidental finger contact and particulate ingress during installation, though cabinet placement in clean environments is recommended. Internal components are selected for extended operating lifespans, achieving a high mean time between failures under continuous electrical load and thermal stress. Surge protection circuitry on the communication ports guards against electrostatic discharge and inductive switching transients commonly found in heavy manufacturing plants. The hardware configuration resists moderate shock and vibration profiles encountered on moving machine frames, ensuring uninterrupted data bridging across production shifts.
Selection Guidance and Alternative Options
Selecting the correct protocol gateway requires verifying the master-slave relationship required by the existing control architecture. The LX-CM026 specifically suits applications where an existing EtherCAT controller must command third-party PROFINET actuators, remote I/O blocks, or drives. System integrators requiring alternative topologies, such as PROFIBUS DP or Modbus TCP integration, should evaluate other models within the same product family to match specific bus requirements. Beijing Zhongping Technology maintains technical documentation and inventory cross-references to assist engineering teams in identifying optimal hardware alternatives for legacy system upgrades and greenfield machine designs.
Frequently Asked Questions (FAQ)
1. What is the standard delivery lead time for this gateway model?
Standard orders are processed from regional inventory, with typical dispatch occurring within 2 to 3 business days depending on destination logistics.
2. Does the unit include a manufacturer warranty?
Yes, the hardware includes a standard 12-month limited warranty covering defects in materials and workmanship from the date of purchase.
3. Can the LX-CM026 operate as an EtherCAT master?
No, the device acts strictly as an EtherCAT slave on the upstream network and functions as a PROFINET master on the downstream side.
4. What software tool is required to configure the PROFINET side?
Standard engineering software supporting GSDML file imports, such as typical PLC programming environments, can configure the PROFINET device parameters.
5. How is firmware updated on this hardware?
Firmware updates are applied through the onboard configuration port using dedicated utility software provided by the manufacturer.
6. What is the maximum data exchange size supported by the gateway?
The device supports up to 1024 bytes of input and output data mapping between the two connected industrial networks.
7. Are diagnostic LED indicators available for troubleshooting?
Yes, front-panel LED indicators display real-time status for power, system errors, and link activity on both network interfaces.
8. Does the gateway require an external power supply isolation module?
The internal power input features built-in galvanic isolation, protecting internal logic circuits from common-mode voltage fluctuations on the main power bus.
FAQ
1.Who are We?
Beijing Zhongping Technology Co., LTD., is a global industrial electrical automation service provider, is a scientific research, design, marketing, technical services, industrial Internet, international import and export services as one of the science and technology companies.
2.What can you buy from us?
PLC, inverter, human-machine interface, hydraulic products, low-voltage power distribution, industrial robots and core components
3.Is the item in stock or need to be purchased from another supplier?
We have a large inventory of goods and have our own warehouse.
4.What advantages do we have over other suppliers?
Our company has a large amount of inventory and a number of warehouses, but also in the country's important industrial provinces and cities with offices and a number of overseas service points. To provide you with intelligent manufacturing one-stop comprehensive services, save efforts, labor and cost.
5.Can you provide 100% new original authentic products?
We only sell new original genuine, no renovation, no fake, only for the original factory original!
6.How long is the delivery time?
If there is a stock, it will take 2-3 working days to ship, if the quantity is large, it will take 5-7 working days after receiving the payment, if it is not a conventional model, it will take some time, we will inform you of the specific delivery time.
7.Is there technical support available?
Of course, we have a professional technical team that can help you solve technical problems.
8.How do we guarantee quality?
We have three processes to control the quality of goods.
1) Our engineers will inspect the production and quality control in the factory regularly.
2) Incoming materials shall be inspected by experienced purchasing engineers before they can be stored.
3) At least 2 people in the logistics department cross-check the goods to be sent before delivery.
9.Can you guarantee the safe and reliable delivery of your products?
Yes, we strictly adopt the international standard packing. We also use special packaging for dangerous goods, and refrigerated shipping for items with temperature requirements. Special item packaging and general cargo standard packaging requirements may incur additional costs.
10.How about the freight?
The cost depends on how you choose to get the goods. Express is usually the fastest but also the most expensive way. Sea freight is the best solution for large quantities of goods. The exact shipping cost depends on the purchase amount、quantity and weight of your order. Please feel free to contact us for more information.
+86 010-64225983
+8613811814778
Building 26, Liyuan Community, Chaoyang District, Beijing, China
