An advanced alarm trip isolator engineered for industrial process control, this device isolates and converts 2-wire, 3-wire transmitter or current source inputs into standard 4 ~ 20 mA signals while driving integrated relay outputs for hardware-level safety interlocks. It eliminates ground loop interference and provides independent high or low limit protection for critical process variables such as pressure, temperature, and level.

In modern process automation, control systems often face vulnerabilities when relying entirely on software-based alarms for emergency shutdowns, as communication latency or PLC scan delays can risk equipment safety. Field engineers frequently require dedicated, hardware-level signal conditioning and trip amplifiers that can decouple loops, supply precise transmitter power, and instantly trigger local interlocks or acoustic warnings upon threshold violation. The C-series signal conditioner modules and isolator amplifiers address these engineering demands by offering full three-way electrical isolation and embedded diagnostic functions. These units ensure high signal fidelity, protect downstream DCS or PLC input cards from electrical surges, and provide flexible threshold configurations via PC or handheld programmers.
Technical Specifications
Power Supply: 18 ~ 60 V DC
Input Signal: DC current signal
Input Impedance: ≤ 100 Ω
Distribution Voltage: Open-circuit voltage ≤ 26 V, output voltage ≥ 16 V @ 20 mA
Output Signal 1: 4 ~ 20 mA
Output Signal 2: Relay contact (programmable alarm value, hysteresis, and delay)
Allowable Load: RL ≤ 550 Ω
Contact Capacity: 250 V AC / 2 A or 30 V DC / 2 A
Response Time: Ta ≤ 500 ms
Power Consumption: 1.8 W @ 24 V DC
Electromagnetic Compatibility: IEC 61326-3-1
Dielectric Strength: ≥ 1500 V AC (between input, output, and power supply)
Insulation Resistance: ≥ 100 MΩ (between input, output, and power supply)
Operating Temperature: -20 °C ~ +60 °C
Storage Temperature: -40 °C ~ +80 °C
Output State: Tracks input across full scale under normal conditions; outputs 0 V/mA during 4 ~ 20 mA input break/short, capped at 110% of span maximum
Connection Type: Screw terminal
Dimensions: Width 17.8 mm × Height 110 mm × Depth 117 mm
Mounting Type: DIN 35 mm rail mounting
Product Certification: CE, FCC
System Integration and Hardware Setup
Deploying these alarm trip isolators into an industrial control panel requires careful attention to cabinet layout, wire routing, and terminal connections. The slim 17.8 mm profile allows high-density packing on standard DIN 35 mm rails, optimizing valuable space inside control enclosures. Panel builders should mount the modules away from high-voltage power components or variable frequency drives to minimize electromagnetic coupling, even though the units comply with stringent IEC 61326-3-1 electromagnetic compatibility standards.
Wiring must utilize shielded twisted-pair cables for analog inputs and outputs, with the shield grounded at a single point to prevent ground loops. The screw terminal blocks accommodate solid or stranded copper conductors securely. When wiring 2-wire or 3-wire transmitters, verify that the internal loop power supply provides sufficient voltage, noting the open-circuit voltage rating of up to 26 V and a loaded voltage of at least 16 V at 20 mA. For relay output connections driving external actuators, safety lights, or emergency shutdown circuits, ensure that switching loads do not exceed the 250 V AC / 2 A or 30 V DC / 2 A contact capacity limits. External fusing is strongly recommended on relay output lines to protect against short circuits in the field wiring.
Reliability and Environmental Durability
Industrial environments demand robust electronic hardware capable of withstanding wide thermal variations, humidity, and continuous electrical stress. These signal conditioners operate reliably across an ambient temperature range of -20 °C to +60 °C and can be stored safely between -40 °C and +80 °C. The low operational power consumption of only 1.8 W helps minimize internal heat accumulation within densely packed control cabinets, reducing thermal strain on electronic components and extending the Mean Time Between Failures (MTBF).
Electrical durability is guaranteed by robust dielectric isolation rated at 1500 V AC between the input, output, and power supply circuits, protecting the control system against severe transient overvoltages. Furthermore, the built-in online fault self-diagnostic function continuously monitors internal circuitry for operational anomalies. In the event of an open or short circuit on the 4 ~ 20 mA input line, the device automatically defaults to a safe 0 V/mA output state, preventing erratic actuator behavior and giving maintenance personnel immediate indication of sensor failure.
Single-Alarm vs. Dual-Alarm Configuration
Selecting the correct model variant depends heavily on the specific safety interlock and process monitoring requirements of the loop. The product lineup offers two distinct configurations to match various application scales.
The single-alarm model, designated as NPGL-C11AD, provides a single relay output alongside the isolated 4 ~ 20 mA analog transmission [cite: 23]. This variant is ideally suited for straightforward monitoring tasks where a single high or low threshold violation must trigger an alarm or interlock, such as a high-level switch for tank overflow prevention.
The dual-alarm model, designated as NPGL-C11AAD, incorporates two independent relay output channels alongside the isolated 4 ~ 20 mA transmission [cite: 23]. This advanced variant allows engineers to configure two distinct trip points—such as a pre-alarm (warning) threshold and an emergency shutdown threshold—on a single process variable. It provides enhanced safety redundancy and tighter process control without requiring additional DIN rail space.
Practical Selection and Wiring Advice
Engineers specifying signal conditioning hardware should evaluate several critical factors during the design phase. First, verify the sensor type and loop configuration, ensuring that the module matches 2-wire, 3-wire, or active current source inputs with an input impedance of 100 ohms or less. Second, determine the required alarm logic: choose the single-alarm version for basic threshold switching, or opt for the dual-alarm version when hierarchical safety interlocks are mandated by plant safety instrumented systems.
When sourcing these components, partnering with experienced regional distributors ensures access to original factory hardware and professional technical support. Beijing Zhongping Technology provides comprehensive cross-reference selection assistance and readily available local stock to minimize project lead times and prevent costly downtime.
Frequently Asked Questions (FAQ)
1. What are the current stock availability and delivery lead times for these isolator modules?
Beijing Zhongping Technology maintains extensive regional warehouse inventories of these industrial modules to support same-day or rapid dispatch, ensuring minimal project wait times compared to overseas shipping channels.
2. What warranty terms and RMA support apply to these units?
All supplied units are backed by a comprehensive 12-month manufacturer warranty, complemented by rigorous pre-shipment quality inspections and streamlined local RMA return procedures handled through Beijing Zhongping Technology.
3. What is the required power supply range and power consumption for these devices?
The modules operate on a wide DC power supply range of 18 to 60 V DC with a typical operational power consumption of 1.8 W.
4. How does the device handle loop power distribution for connected field transmitters?
The internal power distribution circuit provides an open-circuit voltage of up to 26 V DC and maintains an output voltage of 16 V DC or greater at a 20 mA loop current.
5. What are the electrical isolation ratings between different terminals?
The device features robust three-way electrical isolation with a dielectric strength of 1500 V AC and an insulation resistance of 100 megohms or greater between the input, output, and power supply circuits.
6. What happens to the analog output signal if the input sensor experiences a wire break?
In the event of a 4 to 20 mA input wire break or short circuit, the output safely defaults to 0 V/mA, while remaining capped at a maximum of 110% of the normal output range during standard operational fluctuations.
7. What are the physical dimensions and mounting requirements of the module?
The unit features a compact enclosure measuring 17.8 mm in width, 110 mm in height, and 117 mm in depth, designed for standard DIN 35 mm rail installation using secure screw terminals.
8. Can the alarm thresholds and delay parameters be modified by the user?
Yes, users can configure signal types, fault output modes, alarm action logic, trip values, hysteresis, and time delays via a PC connection or a dedicated handheld programmer.
FAQ
1.Who are We?
Beijing Zhongping Technology Co., LTD., is a global industrial electrical automation service provider, is a scientific research, design, marketing, technical services, industrial Internet, international import and export services as one of the science and technology companies.
2.What can you buy from us?
PLC, inverter, human-machine interface, hydraulic products, low-voltage power distribution, industrial robots and core components
3.Is the item in stock or need to be purchased from another supplier?
We have a large inventory of goods and have our own warehouse.
4.What advantages do we have over other suppliers?
Our company has a large amount of inventory and a number of warehouses, but also in the country's important industrial provinces and cities with offices and a number of overseas service points. To provide you with intelligent manufacturing one-stop comprehensive services, save efforts, labor and cost.
5.Can you provide 100% new original authentic products?
We only sell new original genuine, no renovation, no fake, only for the original factory original!
6.How long is the delivery time?
If there is a stock, it will take 2-3 working days to ship, if the quantity is large, it will take 5-7 working days after receiving the payment, if it is not a conventional model, it will take some time, we will inform you of the specific delivery time.
7.Is there technical support available?
Of course, we have a professional technical team that can help you solve technical problems.
8.How do we guarantee quality?
We have three processes to control the quality of goods.
1) Our engineers will inspect the production and quality control in the factory regularly.
2) Incoming materials shall be inspected by experienced purchasing engineers before they can be stored.
3) At least 2 people in the logistics department cross-check the goods to be sent before delivery.
9.Can you guarantee the safe and reliable delivery of your products?
Yes, we strictly adopt the international standard packing. We also use special packaging for dangerous goods, and refrigerated shipping for items with temperature requirements. Special item packaging and general cargo standard packaging requirements may incur additional costs.
10.How about the freight?
The cost depends on how you choose to get the goods. Express is usually the fastest but also the most expensive way. Sea freight is the best solution for large quantities of goods. The exact shipping cost depends on the purchase amount、quantity and weight of your order. Please feel free to contact us for more information.