The INVT GD350-110P-45-NS-B is an Energy Efficient VFD engineered for industrial motors requiring high performance,stability,and smart control.As a Smart AC VFD,it integrates advanced motor control algorithms,predictive energy management,and digital communication interfaces to support modern automation systems.
This drive is capable of managing high dynamic loads,precise speed regulation,and long operating hours in manufacturing,water treatment,HVAC,and general industrial applications.Its advanced control features allow for smooth acceleration and deceleration,energy optimization,and compatibility with IoT-enabled monitoring systems.
For users searching for a high-performance,energy-conscious,and digitally intelligent VFD,the GD350-110P-45-NS-B represents a reliable solution that reduces operating costs while improving process stability.
Understanding High-Performance VFDs in Industrial Applications
What Makes a High-Performance VFD?
High-performance VFDs like the GD350-110P-45-NS-B offer:
Precise motor speed and torque control
Energy-efficient operation to reduce electrical consumption
Advanced protection mechanisms for motor and drive longevity
Communication capabilities for integration into smart automation systems
As a Smart AC VFD,it supports digital inputs/outputs,Modbus,CANopen,and optional IoT cloud interfaces,allowing facility managers to monitor and optimize system performance in real-time.
Why Energy Efficiency Matters
Industrial motors consume a large portion of electricity in plants.By optimizing speed and torque,an Energy Efficient VFD reduces waste,lowers operating costs,and contributes to sustainability initiatives.
Fans,pumps,conveyors,and compressors often operate below full load.A VFD can adjust motor output dynamically,achieving significant energy savings.
Predictive control algorithms reduce unnecessary acceleration/deceleration cycles,further improving efficiency.
Typical Applications
GD350 series drives are widely used in:
Industrial manufacturing machinery
HVAC systems in commercial and industrial buildings
Water and wastewater treatment plants
Material handling and conveyor systems
Pumping and compressing applications requiring precise control
Design Features and Performance Highlights
Key Specifications
Rated Power:up to 110kW(model-specific)
Voltage:380–480V three-phase AC
Control Modes:V/F,vector control,sensorless and encoder-based control
Connectivity:Modbus RTU,CANopen,optional Ethernet/IP
Protection:Overvoltage,overcurrent,short-circuit,overheating,phase loss
Advanced Features
Energy Saving Function:Optimizes power usage according to load and process conditions
Smart Control Algorithms:Auto-tuning,torque compensation,and adaptive frequency control
Digital and Analog Interfaces:Enables integration into PLCs,SCADA,and building management systems
Robust Industrial Design:High temperature tolerance,dust-proof and long operational life
These features allow the GD350-110P-45-NS-B to handle complex industrial processes,maintain reliability,and reduce operational energy costs.
Typical Applications and Use Cases
Manufacturing Process Control
GD350 drives provide precise speed and torque control for conveyors,mixers,and automated production lines,ensuring consistent output quality and reduced mechanical stress.
HVAC Systems
In HVAC applications,the drive optimizes energy consumption for fans and pumps,adjusting speed dynamically according to demand and maintaining comfort while lowering energy bills.
Water and Wastewater Treatment
The VFD controls pumps and blowers with precise flow rate management,reducing pressure fluctuations and ensuring stable system operation.
Smart Industrial Automation
As a Smart AC VFD,GD350 supports remote monitoring and predictive maintenance,enabling real-time adjustments to maintain process stability and avoid downtime.
Energy Efficiency Projects
In facilities focused on energy reduction,the GD350 enables measurable savings through intelligent load management,variable speed operation,and advanced motor protection.
Selection and System Design Considerations
Matching Drive to Motor and Load
Ensure the VFD rating matches motor voltage and power
Identify load type:variable-torque(fans/pumps)or constant-torque(conveyors,compressors)
Determine whether encoder-based control is required for precise positioning
Environmental and Installation Considerations
Adequate ventilation and ambient temperature control
Protection against dust,moisture,and corrosive environments
Compliance with local electrical and safety standards
Long-Term Operational Value
Reduced electricity bills via Energy Efficient VFD operation
Extended motor life due to smoother acceleration/deceleration
Smart monitoring allows predictive maintenance and fewer unplanned stops
FAQ–Customer Questions
Q1:Can the GD350-110P-45-NS-B handle high dynamic loads?
Yes.Its advanced vector control algorithms allow precise torque and speed management under dynamic conditions,making it suitable for conveyors,compressors,and pumps that require rapid load changes.
Q2:How does it save energy?
The drive continuously adjusts motor speed and torque according to process requirements.Its energy-optimized control reduces unnecessary power consumption during partial load operation,lowering electricity costs significantly.
Q3:Is it easy to integrate into existing automation systems?
Yes.With Modbus RTU,CANopen,and optional Ethernet/IP,GD350 supports integration with PLCs,SCADA,and BMS.Its analog/digital inputs and outputs enable seamless control and monitoring.
Q4:What makes it a Smart AC VFD?
The GD350 includes adaptive control,predictive monitoring,and optional IoT connectivity,enabling intelligent operation and remote monitoring.Users can track energy consumption,motor health,and performance metrics in real-time.
Q5:How does it compare with lower-end VFDs like GD270?
Compared to GD270 fan/pump optimized VFDs,the GD350-110P-45-NS-B is high-performance,supports higher power,offers advanced multi-mode motor control,and includes smart connectivity features for industrial automation applications.
FAQ
1.Who are We?
Beijing Zhongping Technology Co., LTD., is a one-stop integrated service provider of intelligent manufacturing, belongs to the Gong Doctor Group, is a scientific research, design, marketing, technical services, industrial Internet, international import and export services as one of the science and technology companies.
2.What can you buy from us?
PLC, inverter, human-machine interface, hydraulic products, low-voltage power distribution, industrial robots and core components
3.Is the item in stock or need to be purchased from another supplier?
We have a large inventory of goods and have our own warehouse.
4.What advantages do we have over other suppliers?
Our company has a large amount of inventory and a number of warehouses, but also in the country's important industrial provinces and cities with offices and a number of overseas service points. To provide you with intelligent manufacturing one-stop comprehensive services, save efforts, labor and cost.
5.Can you provide 100% new original authentic products?
We only sell new original genuine, no renovation, no fake, only for the original factory original!
6.How long is the delivery time?
If there is a stock, it will take 2-3 working days to ship, if the quantity is large, it will take 5-7 working days after receiving the payment, if it is not a conventional model, it will take some time, we will inform you of the specific delivery time.
7.Is there technical support available?
Of course, we have a professional technical team that can help you solve technical problems.
8.How do we guarantee quality?
We have three processes to control the quality of goods.
1). Our engineers will inspect the production and quality control in the factory regularly.
2) Incoming materials shall be inspected by experienced purchasing engineers before they can be stored.
3). At least 2 people in the logistics department cross-check the goods to be sent before delivery.
9.Can you guarantee the safe and reliable delivery of your products?
Yes, we strictly adopt the international standard packing. We also use special packaging for dangerous goods, and refrigerated shipping for items with temperature requirements. Special item packaging and general cargo standard packaging requirements may incur additional costs.
10.How about the freight?
The cost depends on how you choose to get the goods. Express is usually the fastest but also the most expensive way. Sea freight is the best solution for large quantities of goods. The exact shipping cost depends on the purchase amount、quantity and weight of your order. Please feel free to contact us for more information.
+86 010-64225983
+8613811814778
info@zhongpingtech.com
Building 26, Liyuan Community, Chaoyang District, Beijing, China
