The DX30-EtherCAT series servo drive delivers high-speed position synchronization and precise multi-axis motion control for industrial automation. Engineered with an Ethernet communication interface, this unit eliminates network latency in complex manufacturing systems.
Industrial machinery often suffers from bandwidth bottlenecks and communication delays when scaling multi-axis synchronization. The DX30-EtherCAT series solves these challenges by integrating native EtherCAT protocol support into a compact, low-to-medium power footprint ranging from 200W to 1.5kW. Operating on a single-phase or three-phase 220VAC power supply, the drive utilizes an advanced DSP architecture to manage continuous and peak output currents effectively. Engineers can configure multi-axis networks easily through upper computer software, achieving deterministic control cycles required by high-speed electronics assembly and packaging machines.
Technical Specifications
Series Name: DX30-EtherCAT Bus-Type AC Servo Drive
Power Range: 200W - 1.5kW
Communication Interface: Ethernet / EtherCAT Protocol
Input Voltage: Single-Phase 200VAC - 240VAC, 50Hz / 60Hz @ Main Circuit
Control Circuit Power Supply: Common Bus Power Extraction
Frame Type A Continuous Output Current: 1.4 Arms @ 200W
Frame Type B Continuous Output Current: 2.5 Arms @ 400W
Frame Type C Continuous Output Current: 4.6 Arms @ 750W
Frame Type C Continuous Output Current (1kW): 6.9 Arms @ 1000W (Single-Phase 220V)
Frame Type C Continuous Output Current (1.5kW): 9.0 Arms @ 1500W (Single-Phase 220V)
Maximum Output Current: 4.2 Arms @ 200W Model
Maximum Output Current: 7.5 Arms @ 400W Model
Maximum Output Current: 13.34 Arms @ 750W Model
Maximum Output Current: 21.0 Arms @ 1000W Model
Maximum Output Current: 26.5 Arms @ 1500W Model
Minimum External Braking Resistor: 40 Ω @ 200W - 750W Models
Minimum External Braking Resistor: 20 Ω @ 1000W Model
Minimum External Braking Resistor: 15 Ω @ 1500W Model
Cooling Method: Natural Convection @ 200W - 750W Models
Cooling Method: Forced Air Cooling @ 1000W - 1500W Models
Overvoltage Category: Class III
System Integration and Hardware Setup
Deploying the DX30-EtherCAT drive requires rigorous attention to grounding and signal shielding to maintain communication integrity in harsh electrical environments. Connect the EtherCAT master controller using shielded twisted-pair Category 5e or higher cables, ensuring the shield braid makes 360-degree contact with the cabinet entry glands. Route high-voltage motor power cables separately from low-voltage encoder and communication lines to mitigate electromagnetic interference. The common bus power extraction design simplifies internal cabinet wiring, but engineers must verify that external braking resistors match the minimum resistance thresholds of 15 ohms to 40 ohms depending on the specific power frame. Secure the chassis firmly to a grounded metal backplate to optimize thermal dissipation and suppress high-frequency noise currents.
Reliability and Environmental Durability
Industrial automation components must withstand continuous operation under fluctuating thermal and mechanical loads. The DX30 series incorporates robust overvoltage category III protection, safeguarding internal switching components against transient grid surges. Natural cooling is utilized for the 200W through 750W frames, reducing mechanical failure points by eliminating cooling fans, while forced air cooling manages thermal loads efficiently in the 1kW and 1.5kW variants. The drive housing is engineered for standard industrial control cabinet installations, operating reliably within specified ambient temperature ranges. Strict adherence to component selection and circuit protection design ensures a high mean time between failures across demanding factory automation tasks.
Selection Guidance and Alternative Options
Choosing the correct servo drive variant depends heavily on the continuous torque requirements and motor inertia matching of the target application. For light-duty, high-frequency positioning tasks, the 200W and 400W single-phase units provide rapid dynamic response. When upgrading or configuring complex multi-axis systems, engineers can leverage regional logistics and technical resources from Beijing Zhongping Technology to source exact model matches and compatible accessories. Beijing Zhongping Technology offers professional cross-reference selection support and localized inventory availability to streamline equipment integration and minimize downtime.
Frequently Asked Questions (FAQ)
1. What is the primary communication protocol supported by the DX30 series?
The drive natively supports the EtherCAT communication protocol via an Ethernet interface for high-speed multi-axis networking.
2. What is the available power output range for these AC servo drives?
The series covers a power span from 200W to 1.5kW utilizing single-phase or three-phase 220VAC power supplies.
3. Are internal braking resistors included as standard equipment?
No, internal braking resistors are not standard; the system supports external braking resistors with minimum resistance values varying from 15 ohms to 40 ohms by model.
4. How is the control circuit powered in this drive architecture?
The control circuit utilizes a common bus power extraction method derived directly from the main circuit power input.
5. What cooling methods are implemented across the different power frames?
Units from 200W to 750W rely on natural convection cooling, while 1kW and 1.5kW variants utilize integrated forced air cooling.
6. Can multiple drives be synchronized using this communication architecture?
Yes, pairing the EtherCAT bus interface with an upper host controller allows precise synchronous operation across multiple axes.
7. What is the overvoltage rating classification for the DX30 hardware?
The drive is built to meet overvoltage category III standards for industrial electrical distribution safety.
8. How can engineers verify compatibility with existing motor capacities?
Engineers should cross-reference the maximum applicable motor capacity ratings, which scale from 200W up to 1,800W depending on the drive frame.
FAQ
1.Who are We?
Beijing Zhongping Technology Co., LTD., is a global industrial electrical automation service provider, is a scientific research, design, marketing, technical services, industrial Internet, international import and export services as one of the science and technology companies.
2.What can you buy from us?
PLC, inverter, human-machine interface, hydraulic products, low-voltage power distribution, industrial robots and core components
3.Is the item in stock or need to be purchased from another supplier?
We have a large inventory of goods and have our own warehouse.
4.What advantages do we have over other suppliers?
Our company has a large amount of inventory and a number of warehouses, but also in the country's important industrial provinces and cities with offices and a number of overseas service points. To provide you with intelligent manufacturing one-stop comprehensive services, save efforts, labor and cost.
5.Can you provide 100% new original authentic products?
We only sell new original genuine, no renovation, no fake, only for the original factory original!
6.How long is the delivery time?
If there is a stock, it will take 2-3 working days to ship, if the quantity is large, it will take 5-7 working days after receiving the payment, if it is not a conventional model, it will take some time, we will inform you of the specific delivery time.
7.Is there technical support available?
Of course, we have a professional technical team that can help you solve technical problems.
8.How do we guarantee quality?
We have three processes to control the quality of goods.
1) Our engineers will inspect the production and quality control in the factory regularly.
2) Incoming materials shall be inspected by experienced purchasing engineers before they can be stored.
3) At least 2 people in the logistics department cross-check the goods to be sent before delivery.
9.Can you guarantee the safe and reliable delivery of your products?
Yes, we strictly adopt the international standard packing. We also use special packaging for dangerous goods, and refrigerated shipping for items with temperature requirements. Special item packaging and general cargo standard packaging requirements may incur additional costs.
10.How about the freight?
The cost depends on how you choose to get the goods. Express is usually the fastest but also the most expensive way. Sea freight is the best solution for large quantities of goods. The exact shipping cost depends on the purchase amount、quantity and weight of your order. Please feel free to contact us for more information.
+86 010-64225983
+8613811814778
Building 26, Liyuan Community, Chaoyang District, Beijing, China
